Sub-Floor Levelling & Screeding in Perth
For TILES, CARPET, VINYL, TIMBER and EPOXY Flooring
At Art of Concrete, we deliver precision floor levelling in Perth to ensure your floor substrates are perfectly flat, smooth, and ready for finishes like tile, carpet, timber, epoxy coatings, or vinyl overlays.
Whether you’re preparing a new slab or renovating an old and uneven surface, we will use advanced levelling techniques to help you get the floors you envision. Our experienced team will ensure you have the ideal foundation, on time and on budget.
Why Floor Levelling Matters
Uneven floor substrates are always a major concern. Left untouched, they can cause cracks in your floor coatings, water pooling, and premature wear.
Proper floor levelling ensures:
- A smooth surface for floor covering finishes
- Longer-lasting flooring installations
- Better drainage and slip resistance
- Compliance with Australian Standards
Floor Levelling Solutions
We use a range of levelling solutions based on your floor’s condition and the final finish you want:
- Concrete Grinding & Scarifying – To remove high spots and contaminants
- Self-Levelling Compounds – For fast and accurate smoothing of large areas
- Screeding and Patching – For small dips, holes, and transitions
- Laser Levelling – For commercial precision requirements
Our Floor Levelling Process
We follow a proven process that levels and readies a surface for timber, carpet, epoxy, vinyl, and any other floor overlay. This process allows us to even correct problems with existing commercial substrate slabs.
Step 1: Site Inspection & Consultation
Since every project is unique, we always begin with a detailed inspection of your area.
We assess its current condition, moisture levels, and any uneven areas. Specifically, we check for the following conditions, issues, or flaws:
- Surface hardness and contaminants
- Subfloor flatness and slopes
- Cracks, dips, and high points
- Moisture content (critical for epoxy and vinyl floors)
This allows us to determine the most effective approach (e.g., grinding, patching, or applying a self-levelling compound).
Step 2: Choosing A Levelling Strategy
Based on our inspection, we design a custom levelling solution that suits your chosen finish (timber, tiles, epoxy, etc.), budget, and project timeline.
The solution we tailor for you will ensure:
- Optimal bond for top coatings
- Long-lasting results
- Compliance with relevant Australian Standards
Step 3: Surface Preparation & Dust Control
Before we start levelling, we prepare the substrate by employing any combination of these preparation methods (depending on your current situation and floor system requirements):
- Pre-Cleaning & Degreasing – We clean the surface first to remove any oil, grease, and dirt, using floor scrubbers and degreasers.
- Shotblasting – Similar to sandblasting, but with a vacuum to contain any resulting dust. We use a machine that shoots tiny steel beads onto the surface, micro-fracturing the surface and removing surface contaminants like old stains, coatings, and sealers. The resulting texture is like medium sandpaper.
- Mechanical scarifying – More aggressive than shotblasting. Using a machine with rotating cutters, we abrade the substrate to remove the most stubborn of contaminants, especially adhesives. This creates a roughened surface with fine grooves or ridges.
- Concrete grinding – After cleaning, we also use special equipment (e.g., rotating diamond segments) to mill or grind down any high, uneven spots and achieve a more level surface.
- Vacuum-assisted dust containment – We use extra professional dust extraction equipment to keep the work area clean and safe.
Step 4: Application of Levelling Compound
Once the surface is clean and prepped, we apply a premium-grade self-levelling compound or carry out screeding/patching as needed. Our team uses laser-guided tools and levelling bars to ensure even coverage across the entire area.
Our levelling methods include:
- Self-levelling cementitious compounds (for large, uneven areas)
- Skim coating and screeding (for smaller dips or transitions)
- Deep fill patching (for holes or severe undulations)
Step 5: Quality Checks & Curing
After application, we allow the levelling compound to cure and harden. Typical curing time is 24 to 48 hours, depending on compound type and your site’s conditions.
We also conduct precise flatness and slope checks. We ensure all surfaces meet tolerance requirements and are ready for your final floor installation.
Step 6: Clean-Up & Handover
Once cured, we remove all protective masking and ensure the site is clean, tidy, and safe. We’ll walk you through the finished floor and provide recommendations for the next stage of your flooring project—whether that’s polishing, sealing, or applying an epoxy finish.
When Should You Have Floor Levelling Done?
Floor levelling is ideal for these applications:
- Timber floors (residential, retail, commercial)
- Epoxy floor installations in warehouses and garages
- Vinyl and carpet flooring base preparation
- Renovations where slabs have sunk or shifted
Some Frequently Asked Questions About Floor Levelling
| Question | Answer |
|---|---|
| How long does levelling take? | Small rooms: a few hours; large areas: 1–2 days. Compound dries in 24–48 hrs. |
| Can you level over tiles? | Yes, if the tiles are firmly bonded; prep includes cleaning, priming, and smoothing. |
| Is floor levelling dusty? | Not with our dust-extraction equipment and containment measures. We ensure a clean workspace. |
| What affects the cost of the entire floor levelling process? | Generally speaking, it’s the complexity of the work, influenced by area size, substrate condition, moisture issues, and compound type. Cost will also vary according to the local going rates at your site’s location (i.e., state, city, suburb). Expect costs to range from AU$ 30–90 /m². |
| When can final flooring be installed? | Once compound is fully cured—typically 24–48 hrs. depending on humidity. |
Why Choose Art of Concrete?
✔️ Perth-Based Specialists – We understand local soil conditions and construction standards
✔️ Polished Concrete & Epoxy Experts – We know how to prepare floors for perfect finishes
✔️ State-of-the-Art Equipment – Faster, more accurate results
✔️ End-to-End Service – From floor preparation to the final finish
Ready to Level Up Your Floors?
Need concrete grinding as part of your levelling solution? Learn more about how we do Concrete Floor Preparation.
Whether you’re building new or renovating old, you can rely on us. We’re here to make sure your floor is built to last.
Call us today on 0433 530 628 or enquire and request a free quote from us.
What Our Clients Say
⭐⭐⭐⭐⭐
Lisa, perth hills
“We used Art of Concrete to level an uneven slab before laying polished concrete in our home. The finish is stunning and completely seamless. Great communication and flawless workmanship.”
Related Services You Might Need
